logo
Maison
Produits
Au sujet de nous
Visite d'usine
Contrôle de qualité
Contactez-nous
Demande de soumission
Nouvelles
TOGETHER HTL LTD
Aperçu Nouvelles

What Specifications Should I Check Before Buying a Screw Flight Press?

TOGETHER HTL LTD est une très bonne entreprise, je suis très disposé à coopérer avec vous, sûr, efficace, professionnel, honnête, heureux ! Merci de me fournir un service et des produits stables. -----EUROPAT

—— EUROPT INDUSTRIEL

Je suis en ligne une discussion en ligne
Société Nouvelles
What Specifications Should I Check Before Buying a Screw Flight Press?

Before buying a screw flight press, check these key specifications: 1) Processing thickness and material yield strength; 2) Maximum outer diameter and pitch range; 3) Hydraulic tonnage and motor power; 4) Mold dimensions and mounting hole precision; and most importantly, 5) The structural specification of the base frame (solid reinforced vs. hollow).

When sourcing a screw flight press for your screw conveyor production, the catalogue will throw dozens of specifications at you. Motor power, hydraulic pressure, pitch range, outer diameter—it's easy to get lost in the data.

However, relying solely on the spec sheet can lead to a costly mistake. Some specifications are printed clearly, while others—the ones that determine whether your machine lasts 2 years or 8 years—are hidden in the engineering.

1. Processing Thickness and Material Grade

This is the first specification that dictates the machine size.

  • Thickness Range: Check the minimum and maximum strip thickness. A machine rated for 2-14mm cannot handle 20mm plate.

  • Material Grade: The spec sheet might say "up to 20mm carbon steel." But what if you are pressing stainless steel (304/201) or wear-resistant plate like HARDOX? Stainless steel work-hardens, requiring more pressure. Always ask for the maximum thickness rating for the specific material you use most.

2. The Hidden Specification: Solid vs. Hollow Base Frame

This is the most critical specification to verify, and it is rarely printed on a basic spec sheet.

A screw flight press operates under extreme hydraulic pressure. When the machine presses thick steel, the entire structure absorbs massive recoil. Many manufacturers cut costs by using a hollow or skeletal base frame.

Under high tonnage, a hollow frame will flex and warp. When the frame warps, the main shaft misaligns. You will experience inconsistent pitch angles, premature bearing failure, and hydraulic leaks.

What to specify: You must specify a solid reinforced base with fully welded steel plates and internal multi-column supports. This structural specification is what allows a high-quality machine to operate without deformation for 7 to 8 years.

dernières nouvelles de l'entreprise What Specifications Should I Check Before Buying a Screw Flight Press?  0

3. Maximum Outer Diameter and Pitch Range

Check the maximum OD the machine can form. This is limited by the physical size of the machine's swing and the mold dimensions.

  • If you need to form 1200mm outer diameter flights, you need a machine with a heavy frame and a large mold capacity.

  • Check the pitch range as well. Can the machine handle the steep or shallow pitch angles required by your conveyor design?

4. Hydraulic Tonnage and Motor Power

Do not judge the machine's capability by motor power (kW) alone. Motor power drives the hydraulic pump, but the actual forming force comes from the hydraulic cylinder and pressure (measured in tons or MPa).

  • Check the hydraulic pressure rating and the cylinder size.

  • Ensure the hydraulic oil tank capacity is sufficient. A larger tank helps dissipate heat during continuous high-tonnage pressing, preventing oil degradation.

5. Tooling (Mold) Specifications

The mold is the part that actually shapes the blade. You must check:

  • Mold Single Side Width: This dictates the maximum width of the strip you can feed.

  • Mounting Precision: Look at the positioning holes on the mold. If they are poorly machined, the blade's inner diameter will vary.

  • Material and Heat Treatment: A cheap mold will wear out and cause pitch drift. Ask for the mold's steel grade and hardness.

dernières nouvelles de l'entreprise What Specifications Should I Check Before Buying a Screw Flight Press?  1

6. Quality Control Specifications: Pre-Shipment Testing

A spec sheet is just a promise; a testing video is proof. Before you buy, check the supplier's testing specifications.
A reliable supplier will run your specific steel strip through the machine, record a high-definition video of the pressing process, and take photos of the finished flights. This ensures the machine meets the stated specifications before it leaves the factory.

FAQ

1. What is the most common spec trap?
Relying only on motor power. A 5.5 kW motor on a hollow frame will fail faster than a 3 kW motor on a solid frame. Always check the structural weight and base design.

2. How do I verify the mold specification?
Ask for the mold's material certificate and hardness test report. Also, check if the mounting holes are CNC-machined for precise alignment.

3. Why is the hydraulic oil tank size important?
A larger tank keeps the oil cooler. Overheated oil loses viscosity, leading to pressure drops and seal damage.

Buying a screw flight press requires looking past the surface specs. While thickness and hydraulic power matter, the structural integrity of the base frame and the precision of the molds are what guarantee long-term production. Don't settle for a hollow frame.

Contact Lucy

Email:lucychai0315@gmail.com
Whatsapp/Wechat:+86 15373883537
Website:www.refinerdisc.com
Temps de bar : 2026-11-16 16:56:09 >> Liste de nouvelles
Coordonnées
TOGETHER HTL LTD

Personne à contacter: Mr. Maple

Téléphone: +86 17778255675

Télécopieur: 86--311-80690567

Envoyez votre demande directement à nous (0 / 3000)